What functions does the sweeper smart charger include?

作者: admin
发布于: 2025-10-28 11:04
分类: Industry News

 

1.Intelligent Battery Identification
The MCU automatically distinguishes between lead-acid, lithium, and ternary lithium batteries, dynamically switching the charging curve. Charging stops when fully charged, with a ripple of <50 mV and a 30% increase in battery life.

 

2. Multi-stage Charging Profile
Pre-charge → constant current → constant voltage → float charge. Pulse desulfation and capacity restoration are implemented throughout the charging process, allowing for a full charge even in winter.

 

3. Five-Level Safety Protection
Chip-level monitoring for overcharge, overcurrent, overvoltage, short circuit, and reverse polarity. Abnormality is shut off within 0.1 seconds, ensuring spark-free and bulging-free operation.

 

4. Temperature Protection
The NTC monitors the battery and charger temperature in real time. Automatically reduces power when the temperature exceeds 45°C and stops output when the temperature exceeds 60°C, ensuring no "shield protection" in summer.

 

5. Waterproof and Dustproof (IP65/IP67)
Aluminum housing and adhesive potting ensure stable operation in heavy rain, salt spray, and dust. No outdoor charging shelter is required.

 

6. Automatic Battery Identification
Plug and charge instantly, no buttons required. LED/PWM real-time status display makes it easy to see even in dark environments.

 

7. Low Standby Power Consumption
No-load power consumption is less than 0.5 W, saving 8% compared to traditional three-stage chargers and saving 40 kWh of electricity per year.

 

8. Wide Voltage Input
Compatible with 18–72 V, 5–8 batteries can be connected in series, allowing for multiple uses with one charger, even when the device is replaced.

 

9. Automatic Recharge Integration
Linked with the robot vacuum's SLAM system, with an accuracy of less than 5 mm, it automatically recharges at 20% charge, ensuring unattended operation.

 

10. Programmable & OTA
Remotely adjust voltage, current, and cut-off conditions via the app or cloud. OTA firmware updates ensure constant functionality.

 

— Choosing a charger means choosing "battery life + safety + electricity costs."

Chengdian Xinsheng 24V 15A Smart Charger: Choose the right one, enjoy peace of mind!

推荐文章

  • 12-03 2025
    admin
    There are several ways to determine if a lead-acid battery is fully charged, including voltage monitoring, changes in charging current, and observing battery status. Different methods can be used depending on the situation, as detailed below:   Voltage is the most crucial method. Lead-acid batteries have rated voltages such as 12V and 24V. The open-circuit voltage after a full charge (after disconnecting the charger and letting it stand for 1-2 hours) has clear standards:   12V lead-acid battery: The open-circuit voltage after a full charge should be 12.7V~12.8V; if in float charging mode (charger not disconnected), the float charge voltage is usually 13.5V~13.8V.   24V lead-acid battery (composed of two 12V batteries in series): The open-circuit voltage after a full charge is 25.4V~25.6V, and the float charge voltage is 27V~27.6V.   If the batter...
  • 12-03 2025
    admin
    The core reason why lithium batteries can use fast chargers lies in the synergistic advantages of their material properties, charging mechanism, and intelligent management system. This allows them to withstand higher charging currents without easily being damaged. The specific reasons are as follows:   Battery materials and structure are adapted for high-current charging. Lithium batteries use negative electrode materials such as graphite and lithium titanate (LTO), and positive electrode materials such as ternary lithium and lithium iron phosphate. The lithium-ion diffusion coefficient is much higher than that of lead-acid battery electrode materials, enabling rapid completion of the electrochemical process of insertion/extraction. At the same time, lithium batteries have extremely low internal resistance, resulting in low energy loss and low heat generation during chargi...
  • 12-01 2025
    admin
    Manufacturer of U-shaped bare-board stage light power supplies, aluminum shell, customizable with waterproof and mesh covers, 100W-1200W available, suitable for stage lights, PAR lights, wall washer lights, plant lights, etc. #ChengdianXinsheng#
  • toolbar
    toolbar
  • toolbar
    +86-18924633187
  • toolbar
    返回顶部