Winter Robotic Vacuum Cleaner Charger = "Sensitive to Cold, Moisture, and Condensation" Maintain it using the four-step method of "Warmth + Drying + Light Load + Monitoring" for zero malfunctions all winter! I. Warmth – Giving the Charger a "Down Jacket" 1. Storage Temperature: ≥5℃, avoid long-term storage below 0℃; 2. Indoor Charging: Prioritize charging indoors/in a garage to avoid outdoor frost; 3. Anti-freeze Cover: Cover the charger with insulating cotton/foam box to prevent condensation. II. Drying – Preventing "Condensation Short Circuits" 1. Keep Dry: Wipe the outer casing dry before charging to prevent frost and snow from seeping in; 2. Desiccant: Place a silicone bag in the charging area to absorb moisture; 3. Do Not Cover with a Damp Cloth: Never cover the charger with a damp cloth/plastic bag. III. Light Loa...

A floor scrubber charger "not charging" usually indicates a combination of six faults. Follow the three steps of "look → test → replace" to quickly pinpoint the problem: I. Overview of the Six Faults | Fault | Symptom | Quick Diagnosis | | 1. No mains power | Indicator light off | Change socket → Light on → OK | 2. Blown fuse | Indicator light off, multimeter no 300V | Multimeter input → No power → Replace fuse | 3. Broken output wire | Light on but no output | Multimeter output → 0V → Replace wire | 4. Reverse battery connection/short circuit | Light flashing or 0V | Replace with same model battery → Normal → Battery faulty | 5. Bulging capacitor | Light on but low output | Multimeter ESR > 0.1Ω → Replace capacitor | 6. MOSFET short circuit | Light on but short circuit | Mult...

  Waterproof robot vacuum charger = "Waterproof shell + Smart chip + Six-fold protection", latest industry feature list as follows: I. Waterproof and dustproof (IP65/IP67) - Aluminum shell + epoxy potting compound, can withstand short-term immersion in 1 m/30 min water, stable operation in heavy rain, salt spray, and sandstorms. II. Intelligent charging management - MCU automatically identifies: lead-acid/lithium/ternary lithium, dynamically switches charging curves, stops charging when fully charged, ripple <50 mV. - Multi-segment curve: pre-charge → constant current → constant voltage → float charge, full pulse desulfurization, can start fully charged even in winter. III. Six-fold safety protection - Overcharge, overcurrent, overvoltage, short circuit, reverse connection, overtemperature, 0.1 s cut-off, no sparks, no bulging. IV. Temper...

  Waterproof smart chargers cannot directly provide "explosion-proof" protection; they represent different levels of safety concepts, but can be used complementaryly in certain industrial scenarios. The conclusions are as follows:   ① Waterproof ≠ Explosion-proof - Waterproof (IP rating) (e.g., IP67) only indicates dustproof and short-term immersion capability, it does not prevent internal electrical sparks, high temperatures, or component failures from igniting surrounding explosive gases; - Explosion-proof (Ex rating) requires that even if a short circuit, spark, or high temperature occurs inside the equipment, it will not ignite surrounding flammable gases or dust, requiring explosion-proof, increased safety, or intrinsically safe structures.   ② Complementary in Industrial Scenarios In explosion-proof areas (e.g., gas stations, chemical workshops), ...