Core Adaptation Principles 24V 200AH battery, conventional charging recommended at 24V/30A• Lead-acid batteries: Follow the standard charging rate of 0.1C~0.2C (C is the battery capacity of 200AH);• Lithium batteries: Adapt to a rate of 0.2C~0.3C (24V lithium batteries are actually rated at 25.6V/29.2V, requiring a matching voltage charger).   Key Selection Considerations 1. Precise Voltage Matching (Mixing is strictly prohibited)• Lead-acid batteries: Nominal 24V (2 x 12V batteries in series), charging cut-off voltage 28.8V (single cell cut-off 14.4V), the charger must be labeled 24V (adapted to 28.8V cut-off);• Lithium iron phosphate batteries: Nominal 24V (actual 25.6V, 8 series), charging cut-off voltage 29.2V, a 25.6V lithium battery dedicated charger must be selected.2. Prioritize Smart Three-Stage ChargersMu...

In industrial power supplies, LED drivers, communication base stations, and other outdoor equipment, we often see switching power supplies that are completely "potted"—the entire circuit board is completely encased in a layer of transparent or gray resin. This seemingly ordinary resin is actually the "invisible armor" of the switching power supply, providing five core functions to ensure its long-term stable operation in harsh environments. I. Waterproof and Moisture-proof – "Invisible Waterproof Casing"The primary function of potting is waterproofing and moisture protection. The potting compound (mostly silicone or epoxy resin) forms a dense, non-porous barrier after curing, effectively blocking water, salt spray, acids, alkalis, and other corrosive media. This allows the power supply to operate reliably in high-humidity, outdoor, and salt-spray environments (I...